I recently answered a question on a rabbit forum about tattooing your rabbit and the response I got was unexpected. MANY people responded with thanks and questions, so I decided to expand that post here. At the bottom are some questions I received and my answers.
Below is the original post.
What you'll need.
The tattoo goes in the rabbits left ear. The right ear is only tattooed by an ARBA Registrar for two reasons, when you register your rabbit or when it becomes a Grand Champion.
Wrap the rabbit securely (real tight) in a bath towel. It is important to keep their front paws inside the towel or they will shoot out. Securing the rabbit is the most important part of the process. If they can wriggle or squirm away they can at the least make your job WAY harder than it has to be, and at the worst hurt themselves by tearing their ear while you are clamping it. Two people are really needed.
Ready? OK, here we go!
Put the towel on your work surface so it is long-ways left to right. Sit the rabbit on the towel facing away from you. Bring one side over the rabbit and snug it under him. Pull the free end of the towel to snug it up and bring it over in the other direction and wrap all the excess towel over its back. Like a burrito. I wrap the bunny up and then my helper holds them securely while I clamp the ear.
Hold the rabbit in front of you with the rabbit facing to your left. Hold the clamp in your right hand with the handle going off to your right. This will orient the tattoo correctly.
Hold the ear with your left hand and place your tattoo between the veins to reduce the likelihood of bleeding. On white rabbits this is easy. On black rabbits I like to tattoo on a bright day or I have my helper hold a flashlight behind the ear so I can see the veins.
Have your helper hold the rabbit very firmly, and remember they like to back up. Squeeze the tattoo clamp firmly making sure all the pins penetrate the ear.
Then take a Q-tip (mix your ink ahead of time) dip it in the ink and RUB it into the tattooed area. I rub pretty vigorously, use a lot of ink, and probably use 2-3 Q-tips (no double dipping, please!) per tattoo. Some ink may come through if one or more pins fully penetrate the ear. No biggie.
Tips:
Why do you need to tattoo?
Remember, this is just how I do it and it works for me. I hope it helps you when you start tattooing your rabbits!
All Content Copyright Crystal Creek Rabbitry
©2009